P.E.S Polyethylene Pipes and Fittings Manufacturing Co. Header Image

P.E.S Products

P.E.S provides a wide range of products required for a complete piping system. Solid- wall polyethylene pipes up to 2500 mm along with complete sets of fabricated and injection molding fittings including tees, reducing tees, elbows, reducers, flanges, manhole, handhole, and polyethylene tank and polymer risers are produced by P.E.S.

Telecommunication subduct

HDPE Subduct, Subduct, Telecomunication Subduct | Electrical & telecommunications, Special PE Products, Polymer riser | 0 Comments | | Return|
0 ( 0 reviews)
|

Optical fibers and telecommunication and electrical cables should be protected against mechanical hazards and damages by a coverage. All cables in buildings installed underground or on walls should be also protected. Due to insulation properties, PE is a popular alternative for protecting wires, cables and other electrical products.

 

Advantages of PE subducts

  • PE pipes lack any hazardous or destructive agent for electrical cables. PE pipes do not never rust.
  • PE pipes are highly resistant to fracture and tensions leading to their unique performance in harsh environments.
  • Crack growth and propagation occur slowly in PE pipes. Accordingly, if PE pipes are cracked suddenly, the crack is not extended along the pipe. In other words, PE pipes are safe against slow crack growth.
  • PE pipes are easily transported and installed.
  • PE pipes have a good thermal performance. In other words, they show a wide thermal resistance range. PE pipes are not also degraded at low temperatures.
  • PE pipes are highly resistant to moisture.
  • This type of pipes have a long lifetime over 50 years.
  • PE pipes are electrical insulators and prevent fire extension.

Related

PE reducing coupling

PE reducing coupling

Reducing coupling is a PE fitting which is mainly used for reducing the cross section area of the ma...

Polypropylene Pipes

Polypropylene Pipes

The Italian scientist, Giulio-Natta, discovered PP properties in the mid-1950s when high density pol...

Polyethylene Pipes

Polyethylene Pipes

With recent advances in PE industry, PE pipes and fittings have been introduced as a good alternativ...

PE tanks

PE tanks

PE tanks are closed enclosures designed for fluid storage at a pressure larger than 1 to 10 bar. The...

PE handhole & manhole

PE handhole & manhole

Single-wall PE manholes with a size of 500 to 2500 mm are produced at customer’s request according ...

PE tees

PE tees

Tees are among widely used PE fittings that are classified as follows

Post a Comment

Categories

Product Tags