P.E.S Polyethylene Pipes and Fittings Manufacturing Co. Header Image

P.E.S Products

P.E.S provides a wide range of products required for a complete piping system. Solid- wall polyethylene pipes up to 2500 mm along with complete sets of fabricated and injection molding fittings including tees, reducing tees, elbows, reducers, flanges, manhole, handhole, and polyethylene tank and polymer risers are produced by P.E.S.

PE tanks

Tank, PE tank, HDPE Tank | Chemical industries, Oil industry, Mineral industries, Applications, PE tanks, Special PE Products | 0 Comments | | Return|
0 ( 0 reviews)
|

PE tanks are closed enclosures designed for fluid storage at a pressure larger than 1 to 10 bar. The pressure is developed by internal pressure of fluids or external pressure due to direct or indirect heating of the tank.

Pressure difference in PE tanks is very dangerous and may lead to explosion and destruction. Consequently, PE tanks are designed and operated under legal supervision of engineering organizations. Maximum pressure and temperature are the key factors in the design of PE tanks.

 

Applications of PE tanks

PE tanks are used in industry as compressed air, water and gas storage tanks, pressurized enclosure, shuttle and submarine air storage tanks, pneumatic tanks, pressurized hydraulic tanks and storage of liquid gases such as ammonia, chlorine, propane, butane, LPG and so on.

Non-industrial applications of PE tanks include oxygen storage tanks and domestic hot water storage tanks and so on. PE tanks are mostly sued in oil, gas and petrochemical industries..

 

Related

Polyethylene Pipes

Polyethylene Pipes

With recent advances in PE industry, PE pipes and fittings have been introduced as a good alternativ...

PE Elbows

PE Elbows

Elbows as PE fittings are widely used in transmission lines and networks...

Telecommunication subduct

Telecommunication subduct

Optical fibers and telecommunication and electrical cables should be protected against mechanical ha...

Polypropylene Pipes

Polypropylene Pipes

The Italian scientist, Giulio-Natta, discovered PP properties in the mid-1950s when high density pol...

PE handhole & manhole

PE handhole & manhole

Single-wall PE manholes with a size of 500 to 2500 mm are produced at customer’s request according ...

PE reducing coupling

PE reducing coupling

Reducing coupling is a PE fitting which is mainly used for reducing the cross section area of the ma...

Post a Comment

Categories

Product Tags